東莞市奧亞塑膠原料有限公司

PA尼龍料|PC塑料|PBT|PPS|LCP|POM|PEI|TPU|PES|PSU|氟塑料等等

站內搜索
 
新聞中心
產品分類
聯系方式
友情鏈接
您當前的位置：首頁 » 塑料價格 » PA66美國杜邦70G13L NC010代理商
PA66美國杜邦70G13L NC010代理商
點擊圖片查看大圖
產品/服務： 瀏覽次數：605PA66塑膠原料 
規 格： 25千克/包 
品 牌： 美國杜邦 
單 價： 電議/面議 
起訂量： 25 千克 
供貨總量：
發貨期限： 自買家付款之日起 1 天內發貨
更新日期： 2020-07-13  有效期至：長期有效
聯 系 人： 劉華 （先生）
公司電話：
即時通訊：    


«上一個產品     下一個產品»
產品屬性
 產品型號：  
 產品規格：  25千克/包
 產品品牌：  美國杜邦
產品優勢
PA66美國杜邦70G13L NC010：Zytel?70G13L是13％的玻璃纖維增強聚酰胺66樹脂注塑成型
詳細信息
 PA66美國杜邦70G13L NC010物性表測試數據：
注塑成型 
預處理 
干燥推薦，如果樹脂中水分含量超過建議水平 
干燥溫度=80°C 
干燥時間，除濕機=2-4小時 
處理含水率=<0.2％ 
處理 
熔體溫度適=295℃ 
熔體溫度范圍=285-305°C 
模具溫度適=100°C 
模具溫度范圍=70-120°C 
大螺桿切向速度：0.15米/秒 
前流速度：150毫米/秒 
保持壓力：85兆帕 
保持壓力范圍：50?100兆帕 
背壓：低 
保壓時間：2.5秒/mm 
大保持時間：15分鐘
Rheological properties dry / cond Unit Test Standard  
Viscosity number 150 / * cm³/g ISO 307, 1157, 1628  
Moulding shrinkage, parallel 0.7 / * % ISO 294-4, 2577  
Moulding shrinkage, normal 1.2 / * % ISO 294-4, 2577
Mechanical properties dry / cond Unit Test Standard  
Tensile Modulus 5500 / 3500 MPa ISO 527-1/-2  
Stress at break 120 / 75 MPa ISO 527-1/-2  
Strain at break 3 / 13 % ISO 527-1/-2  
Flexural Modulus 4800 / 2900 MPa ISO 178  
Flexural Strength 190 / 100 MPa ISO 178  
Tensile creep modulus     ISO 899-1  
1h * / 3300 MPa    
1000h * / 2200 MPa    
Charpy impact strength     ISO 179/1eU  
23°C 40 / 70 kJ/m²    
-30°C 40 / 30 kJ/m²    
Charpy notched impact strength     ISO 179/1eA  
23°C 5 / 6 kJ/m²    
-30°C 4.5 / 4 kJ/m²    
-40°C 4.5 / 4 kJ/m²    
Izod notched impact strength     ISO 180/1A  
23°C 4.5 / 4 kJ/m²    
-30°C 4.5 / 3 kJ/m²    
-40°C 4.5 / 3 kJ/m²    
Izod impact strength     ISO 180/1U  
23°C 40 / 55 kJ/m²    
-30°C 35 / 28 kJ/m²
 
Thermal properties dry / cond Unit Test Standard  
Melting temperature, 10°C/min 262 / * °C ISO 11357-1/-3  
Glass transition temperature, 10°C/min 80 / - °C ISO 11357-1/-2  
Temp. of deflection under load     ISO 75-1/-2  
1.8 MPa 238 / * °C    
0.45 MPa 258 / * °C    
Vicat softening temperature, 50°C/h, 50N 205 / * °C ISO 306  
Coeff. of linear therm. expansion, parallel 40 / * E-6/K ISO 11359-1/-2  
Coeff. of linear therm. expansion, normal 96 / * E-6/K ISO 11359-1/-2  
RTI, electrical, 0.8mm 125 / * °C UL 746B  
RTI, impact, 0.8mm 120 °C UL 746B  
RTI, strength, 0.8mm 125 °C UL 746B  
Flammability dry / cond Unit Test Standard  
Burning Behav. at 1.5mm nom. thickn. HB / * class IEC 60695-11-10  
Thickness tested 1.5 / * mm IEC 60695-11-10  
Burning Behav. at thickness h HB / * class IEC 60695-11-10  
Thickness tested 0.7 / * mm IEC 60695-11-10  
Oxygen index 24 / * % ISO 4589-1/-2  
Glow Wire Flammability Index, 0.75mm 650 / - °C IEC 60695-2-1/2  
Glow Wire Flammability Index, 1.5mm 650 / - °C IEC 60695-2-1/2  
Glow Wire Flammability Index, 3mm 800 / - °C IEC 60695-2-1/2  
Glow Wire Ignition Temperature, 0.75mm 675 / - °C IEC 60695-2-1/3
Electrical properties dry / cond Unit Test Standard  
Relative permittivity     IEC 60250  
100Hz 3.9 / - -    
1MHz 3.2 / - -    
Dissipation factor     IEC 60250  
100Hz 130 / - E-4    
1MHz 150 / - E-4    
Volume resistivity 1E14 / - Ohm*m IEC 60093  
Surface resistivity * / 1E15 Ohm IEC 60093  
Electric strength 25 / - kV/mm IEC 60243-1  
Electric Strength, Short Time, 2mm 25 / - kV/mm IEC 60243-1  
Other properties dry / cond Unit Test Standard  
Humidity absorption, 2mm 2.2 / * % Sim. to ISO 62  
Water absorption, 2mm 7.6 / * % Sim. to ISO 62  
Density 1230 / - kg/m³ ISO 1183  
Water Absorption, Immersion 24h 1.7 / * % ASTM D 570
VDA Properties Value Unit Test Standard  
Burning rate, Thickness 1 mm 27 mm/min ISO 3795 (FMVSS 302)  
Emission of organic compounds 6 µgC/g VDA 277  
Chemical Media Resistance
Acids
Acetic Acid (5% by mass) (23°C)
Citric Acid solution (10% by mass) (23°C)
Lactic Acid (10% by mass) (23°C)
Hydrochloric Acid (36% by mass) (23°C)
Nitric Acid (40% by mass) (23°C)
Sulfuric Acid (38% by mass) (23°C)
Sulfuric Acid (5% by mass) (23°C)
Chromic Acid solution (40% by mass) (23°C)
Bases
Sodium Hydroxide solution (35% by mass) (23°C)
Sodium Hydroxide solution (1% by mass) (23°C)
Ammonium Hydroxide solution (10% by mass) (23°C)
Alcohols
Isopropyl alcohol (23°C)
Methanol (23°C)
Ethanol (23°C)
Hydrocarbons
n-Hexane (23°C)
Toluene (23°C)
iso-Octane (23°C)
Ketones
Acetone (23°C)
Ethers
Diethyl ether (23°C)
Mineral oils
SAE 10W40 multigrade motor oil (23°C)
SAE 10W40 multigrade motor oil (130°C)
SAE 80/90 hypoid-gear oil (130°C)
Insulating Oil (23°C)
Standard Fuels
ISO 1817 Liquid 1 - E5 (60°C)
ISO 1817 Liquid 2 - M15E4 (60°C)
ISO 1817 Liquid 3 - M3E7 (60°C)
ISO 1817 Liquid 4 - M15 (60°C)
Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C)
Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C)
Diesel fuel (pref. ISO 1817 Liquid F) (23°C)
Diesel fuel (pref. ISO 1817 Liquid F) (90°C)
Diesel fuel (pref. ISO 1817 Liquid F) (>90°C)
Salt solutions
Sodium Chloride solution (10% by mass) (23°C)
Sodium Hypochlorite solution (10% by mass) (23°C)
Sodium Carbonate solution (20% by mass) (23°C)
Sodium Carbonate solution (2% by mass) (23°C)
Zinc Chloride solution (50% by mass) (23°C)
Other
Ethyl Acetate (23°C)
Hydrogen peroxide (23°C)
DOT No. 4 Brake fluid (130°C)
Ethylene Glycol (50% by mass) in water (108°C)
1% nonylphenoxy-polyethyleneoxy ethanol in water (23°C)
50% Oleic acid + 50% Olive Oil (23°C)
Water (23°C)
Water (90°C)
Phenol solution (5% by mass) (23°C)


Symbols used:
possibly resistant
Defined as: Supplier has sufficient indication that contact with chemical can be potentially accepted under the intended use conditions and expected service life. Criteria for assessment have to be indicated (e.g. surface aspect, volume change, property change).


not recommended - see explanation
Defined as: Not recommended for general use. However, short-term exposure under certain restricted conditions could be acceptable (e.g. fast cleaning with thorough rinsing, spills, wiping, vapor exposure).

相關產品
共0條  相關評論
 免責聲明：（1）以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，環球塑化網對此不承擔任何保證責任。我們?cè)瓌t上建議您優先選擇“塑企通”會員合作! （2）同時我們鄭重提醒各位買/賣家，交易前請?jiān)敿?xì)核實對方身份，切勿隨意打款或發貨，謹防上當受騙。如發現虛假信息，請向環球塑化網舉報。
PC塑膠原料 TPU塑膠原料 ASA塑膠原料 TPV塑膠原料 TPEE塑膠原料 PA66塑膠原料代理商 PA66塑膠原料代理商 CAB塑膠原料供應商 PA6T塑膠原料 PES塑膠原料
©2024 環球塑化網 版權所有   技術支持： 環球塑化網     訪問量：1036839  管理入口

收縮

  • 電話咨詢

  • 0769-87120762
QR code
關閉
關閉
請輸入驗證碼