供應(yīng)SABIC創(chuàng)新LNP Lubricomp PEEK 聚醚醚酮
    聯(lián)系人;李生18219005688 
美國液氮LNP LUBRICOMP PEEK LCL33E 碳纖維增強材料15%,PTFE潤滑劑 (15%)
美國液氮LNP LUBRICOMP PEEK LCL33 碳纖維增強材料15%,PTFE潤滑劑 (15%)
美國液氮LNP LUBRICOMP PEEK LCL33EXQ 碳纖維增強材料15%,PTFE潤滑劑 (15%)
美國液氮LNP LUBRICOMP PEEK LCL36 碳纖維增強,PTFE潤滑劑,導電
美國液氮LNP LUBRICOMP PEEK LCL36E 碳纖維增強,PTFE潤滑劑,導電
美國液氮LNP LUBRICOMP PEEK LL002 PTFE潤滑劑(10%)
美國液氮LNP LUBRICOMP PEEK LL003 PTFE潤滑劑(15%)
美國液氮LNP LUBRICOMP PEEK LL004 PTFE潤滑劑(20%)
美國液氮LNP LUBRICOMP PEEK LL004C PTFE潤滑劑(20%)
美國液氮LNP LUBRICOMP PEEK LL004E PTFE潤滑劑(20%)
美國液氮LNP LUBRICOMP PEEK LX00430 添加潤滑劑
美國液氮LNP LUBRICOMP PEEK LX82803 添加潤滑劑
美國液氮LNP LUBRICOMP PEEK LX91475 耐熱高335度
美國液氮LNP Stat-Kon* PEEK LX00797C 耐熱高335度
美國液氮LNP Stat-Kon* PEEK LX04420C 碳纖維增強導電
美國液氮LNP THERMOCOMP PEEK LC003E 碳纖維增強材料15%
美國液氮LNP THERMOCOMP PEEK LC004XXP 碳纖維增強20%,導電

LNP?LUBRICOMP? Compound LCL33EXQ

SI

| British

| Metric

| PDF

Americas: COMMERCIAL

Also known as:LNP?LUBRICOMP?Compound LCL33EXQ

Product reorder name:LCL33EXQ

LNP LUBRICOMP LCL33EXQ is a compound based on Polyetheretherketone containing 15% Carbon Fiber, 15% PTFE. Added features of this material include: Wear Resistant, Easy Molding.

Property

TYPICAL PROPERTIES (1)
MECHANICAL	Value	Unit	Standard
Tensile Stress, brk, Type I, 5 mm/min	1880	kgf/cm2	ASTM D 638
Tensile Strain, brk, Type I, 5 mm/min	1.8	%	ASTM D 638
Tensile Modulus, 5 mm/min	163100	kgf/cm2	ASTM D 638
Flexural Stress, brk, 1.3 mm/min, 50 mm span	2820	kgf/cm2	ASTM D 790
Flexural Modulus, 1.3 mm/min, 50 mm span	136600	kgf/cm2	ASTM D 790
Tensile Stress, break, 5 mm/min	181	MPa	ISO 527
Tensile Strain, break, 5 mm/min	1.6	%	ISO 527
Tensile Modulus, 1 mm/min	13960	MPa	ISO 527
Flexural Stress	276	MPa	ISO 178
Flexural Modulus, 2 mm/min	13530	MPa	ISO 178
IMPACT	Value	Unit	Standard
Izod Impact, notched, 23°C	7	cm-kgf/cm	ASTM D 256
Izod Impact, notched 80*10*4 +23°C	5	kJ/m2	ISO 180/1A
THERMAL	Value	Unit	Standard
HDT, 1.82 MPa, 3.2mm, unannealed	320	°C	ASTM D 648
PHYSICAL	Value	Unit	Standard
Specific Gravity	1.45	-	ASTM D 792
Melt Volume Rate, MVR at 300°C/5.0 kg	30	cm3/10 min	ASTM D 1238
Poisson's Ratio	0.43	-	ISO 527-1/2
Wear Factor Washer	14	10^-10 in^5-min/ft-lb-hr	ASTM D 3702 Modified
Dynamic COF	0.37	-	ASTM D 3702 Modified
Static COF	0.35	-	ASTM D 3702 Modified

Source GMD, last updated:2014/04/10

Processing

Parameter
Injection Molding	Value	Unit
Drying Temperature	150	°C
Drying Time	4 - 6	hrs
Front - Zone 3 Temperature	380 - 400	°C
Middle - Zone 2 Temperature	380 - 400	°C
Rear - Zone 1 Temperature	370 - 380	°C
Mold Temperature	175 - 190	°C
Back Pressure	0.3 - 0.7	MPa
Screw Speed	60 - 100	rpm

Source GMD, last updated:2014/04/10